Automec

Automec is a leader in backgauge systems for press brakes and shears. This manufacturer works with many of our other equipment manufacturers to provide unique and accurate positioning systems for heavy machinery and metal fabrication equipment. Automec backgauge systems are capable of a wider variety of functions and complex sheet metal positioning in order to achieve accurate bends and cuts for a wide variety of sheet metal materials and complex metal fabrication productions.

Automec提供以下背规产品:

• 架上取系统
• Easygage系统
• Squaregage系统
• Shearfeed系统

Automec offers a wide variety of backgauge systems to meet the requirements of any metal fabrication application. They offer both simple and complex backgauge systems to interface with a wide variety of controls. The controls and backgauge systems offered by Automec are available with many different options for functionality, 操作, 和工作的复杂性. Many of the controls are capable of storing programming for thousands of jobs and all are capable of positioning the material correctly every time.

 

数控150后压力表控制升级套件

(由数控150控制组成, 架上取电缆(MTC), 所有继电器板, 继电器板电缆, 线性范围电缆, 和自动前进开关).

数控150是一种经济型电脑, simple-to-use control that incorporates the most popular features used in our 30-plus years experience in the press brake backgauging business. 数控150 will control any of the Automec backgauge configurations as either 1-axis (backgauge), 2-axis (Ram Control) or 3-axis (programmable gauge bar height).  此控件具有2年的保修.

数控150控制规范
11位存储部分	所有ram尺寸可以偏移+/- .393″，一个数据条目	用2轴或3轴系统在夹点上缩回
150个职位(00至150个)	递增更改维度的计算器	在/毫米转换
每次作业20弯	零件计数器	薄膜键盘
Programming delay/retract between bends (0-19 seconds)	1、2或3个轴	30天的电池备份
津贴+ / -弯曲 .393″	.001年“决议	输入电源- 115vac +/- 10% 50/ 60hz, 7A
	红色L.E.D. 显示	Ram 显示 can show true ram position or freeze lowest position attained for diagnosis

架上可 数控150

MINIBRUTE

 

 

The MINIBRUTE compact gauge for pressbrakes with 3´ to 8´ 6˝ between sideframes. This unit is available with a 66˝ gauge bar and provides up to 20˝ of travel.

---

G24系列

 

 

The A compact gauge for press brakes with 12˝ to 42˝ between sideframes. This unit is available with a 3´ gauge bar for light applications.

---

 

 

B型是Automec最受欢迎的车型. Ideal for pressbrakes with up to 8´6˝ between the sideframes.

---

 

CNC 300后挡控制升级套件

(由CNC 300控制组成, 架上取电缆(MTC), 所有继电器板, 继电器板电缆, 线性范围电缆, 前参考开关, 和自动前进开关).

CNC 300 is a control for Automec backgauges that can be programmed as simply as the 数控150 or it can be programmed to use an array of sophisticated functions. CNC 300 will control any of the Automec backgauge configurations as either a 1-axis (backgauge), 2-axis (ram control) or 3-axis (programmable gauge bar height).  此控件具有2年的保修.

 

CNC 300控制规格
Ram 显示 can show true ram position in depth or angle.	包括单入口滑枕偏移量和弯曲余量
所有ram尺寸可以偏移+/- .393″，一个数据条目	RS232接口及软件
300个职位(00至299)	工具高度自动滑枕校准
每个工作10个弯折(可链接)	.001年“决议
工具库	红色L.E.D. 显示
深度或角度模式	在/毫米转换
Programmable delay / retract between bends (0-19 sec.)	触觉按钮
津贴+ / -弯曲 .393″	30天电池备用
递增更改维度的计算器	输入电源- 115vac +/- 10% 50/ 60hz, 7A
角度调整角度校正	24″或48″背规
Backguage reversal on pinch point (time and distance)	11位作业号
零件计数器	1、2或3轴可用

后压力表可用于CNC 300

The MINIBRUTE compact gauge for pressbrakes with 3´ to 8´ 6˝ between sideframes. This unit is available with a 66˝ gauge bar and provides up to 20˝ of travel.

---

G24系列

 

 

The A compact gauge for press brakes with 12˝ to 42˝ between sideframes. This unit is available with a 3´ gauge bar for light applications.

---

 

 

B型是Automec最受欢迎的车型. Ideal for pressbrakes with up to 8´6˝ between the sideframes.

---

 

 

The HD heavy-duty offers more rigidity for larger pressbrakes or when progressive die set-ups are used.

Amada需要P型号, Promecam, and other brakes in which the rear bed clearance is less than 7˝. This low-profile backgauge bolts right to the die rail.

---

 

 

The TD has 3 drive screws with the center drive flanked by 2 drives 6´ away on each side. 适用于大床冲压制动器.

---

G48

 

PC 800后压力表控制升级套件

(由pc800控制, 电缆, 继电器板, 线性尺度组装, 越来越多的硬件, 并要求安装.)此升级需要自动安装.

一幅画抵得上1000个弯. Automec’s PC 800 is a graphical control for it’s family of CNC backgauges that uses digital photos and 2-D graphics to make your press brake forming easier.  PC 800 allows you to simply photograph your press brake tooling and ben sequences, 把它们整合到你的御术程序中. The PC based system uses a Microsoft Windows Pro-Win7-32Bit operating system which is familiar to most people and is seamless to network. 工作可以在折弯机或离线编程. Multiple press brakes can share information with a simple windows network that you can set up yourself. Files and folders with virtually infinite job and tooling storage are stored and sorted like any Windows equipped computer.  此控件具有1年的保修.

PC 800控制参数
Bend Wizard Graphical Interface Software with off-line programming	Programmable PLC functions and configurable machine parameters
由1.8 GHz Dual Core CPU, 160 GB hard drive and 2 GB DDR3 Memory	15.1″彩色液晶工业触摸屏
Virtually unlimited job tooling and materials library storage	可提供多达3个轴
Two data entry methods -touch screen or standard PC keyboard	轴分辨率 .001
Sub-folders can be created for cataloging of bend jobs identical to the file management system used on a Microsoft Windows based computer	轴可重复性+ / - .002
60兆赫处理	在/毫米转换
工业PC与MS Windows XP/Win7	USB记忆棒完全恢复系统
2个外接USB接口	输入电源- 110 VAC, 1相50/60 HZ, 3安培最大
可编程延迟和缩回捏点	标准PC键盘
自动轴初始化程序	系统包含DP-4挂件

 

 

有关Automec后挡系统的更多信息, call the backgauge specialists at 永利304官方入口 today.